Safety precautions for fire extinguishers

Jun 11, 2024

Leave a message

1. The outer surface of the fire extinguisher pressure gauge shall not have defects such as deformation and damage, otherwise it should be replaced.
2. Whether the pointer of the pressure gauge of the fire extinguisher is in the green zone, otherwise it should be filled with driving gas.
3. Whether the nozzle of the fire extinguisher has defects such as deformation, cracking, and damage, otherwise it should be replaced.
4. Whether the jet hose is unblocked, whether there is deformation and damage, otherwise it should be replaced.
5. The metal parts such as the pressure handle and valve body of the fire extinguisher shall not have serious damage, deformation, rust and other defects that affect the use, otherwise they must be replaced.
6. Whether the safety pin and lead seal are intact and whether they have been opened and sprayed.
7. The fire extinguisher with serious deformation of the cylinder, serious corrosion of the cylinder (a large area of patent leather falling off, and the rust area is greater than or equal to one-third of the total area of the cylinder) or the connection part and the bottom of the cylinder must be scrapped.
8. The rubber and plastic parts of the fire extinguisher shall not be deformed, discolored, aged or broken, otherwise they must be replaced.

 

1

 

Send Inquiry
contact us